HELP!!!!

Anything else to do with MoM IME
Post Reply
comemostro
Posts: 5
Joined: Fri Jul 06, 2007 10:16 pm

HELP!!!!

Post by comemostro »

noW i CAN INTRO TO THE MOMCLIENT BUT i HAVE A PROBLEM PLEASE HELP ME

D3D created ok
AdapterCount = 1

Adapter 0 description = SiS 540
Adapter 0 driver = dd540_32.dll
Adapter 0 current mode = 1024 x 768 x R5G6B5
Adapter 0 supports device type HW in windowed mode
Adapter 0 doesn't support device type RF in windowed mode
Adapter 0 doesn't support device type SW in windowed mode
Adapter 0 supplied caps for device type HW
Adapter 0 refused to supply caps for device type RF
Adapter 0 refused to supply caps for device type SW
Adapter 0 supports 3 different full screen modes in format X8R8G8B8
Adapter 0 format X8R8G8B8 mode no. 0 = 640 x 480 x 0 Hz
This mode does support device type HW
This mode doesn't support device type RF
This mode doesn't support device type SW
Adapter 0 format X8R8G8B8 mode no. 1 = 800 x 600 x 0 Hz
This mode does support device type HW
This mode doesn't support device type RF
This mode doesn't support device type SW
Adapter 0 format X8R8G8B8 mode no. 2 = 1024 x 768 x 0 Hz
This mode does support device type HW
This mode doesn't support device type RF
This mode doesn't support device type SW
Adapter 0 supports 0 different full screen modes in format A8R8G8B8
Adapter 0 supports 0 different full screen modes in format A2R10G10B10
Adapter 0 supports 0 different full screen modes in format X1R5G5B5
Adapter 0 supports 0 different full screen modes in format A1R5G5B5
Adapter 0 supports 8 different full screen modes in format R5G6B5
Adapter 0 format R5G6B5 mode no. 0 = 640 x 480 x 0 Hz
This mode does support device type HW
This mode doesn't support device type RF
This mode doesn't support device type SW
Adapter 0 format R5G6B5 mode no. 1 = 800 x 600 x 0 Hz
This mode does support device type HW
This mode doesn't support device type RF
This mode doesn't support device type SW
Adapter 0 format R5G6B5 mode no. 2 = 1024 x 768 x 0 Hz
This mode does support device type HW
This mode doesn't support device type RF
This mode doesn't support device type SW
Adapter 0 format R5G6B5 mode no. 3 = 640 x 400 x 0 Hz
This mode does support device type HW
This mode doesn't support device type RF
This mode doesn't support device type SW
Adapter 0 format R5G6B5 mode no. 4 = 320 x 200 x 0 Hz
This mode does support device type HW
This mode doesn't support device type RF
This mode doesn't support device type SW
Adapter 0 format R5G6B5 mode no. 5 = 320 x 240 x 0 Hz
This mode does support device type HW
This mode doesn't support device type RF
This mode doesn't support device type SW
Adapter 0 format R5G6B5 mode no. 6 = 400 x 300 x 0 Hz
This mode does support device type HW
This mode doesn't support device type RF
This mode doesn't support device type SW
Adapter 0 format R5G6B5 mode no. 7 = 512 x 384 x 0 Hz
This mode does support device type HW
This mode doesn't support device type RF
This mode doesn't support device type SW

Adapter 0 Caps for device type HW read OK
Adapter 0 device type HW does support presentation interval ndgd3dpiImmediate
Adapter 0 device type HW does support presentation interval ndgd3dpi1Frame
Adapter 0 device type HW doesn't support presentation interval ndgd3dpi2Frames
Adapter 0 device type HW doesn't support presentation interval ndgd3dpi3Frames
Adapter 0 device type HW doesn't support presentation interval ndgd3dpi4Frames
Adapter 0 device type HW does not support Transformations and Lightning in Hardware (*)
Adapter 0 device type HW is fine with non-square textures
Adapter 0 device type HW does not support conditional non power-of-two textures
Adapter 0 device type HW must have all textures as powers-of-two
Adapter 0 device type HW overall appears not to be able to use non-power-of-two textures

Adapter 0 Caps for device type RF not available

Adapter 0 Caps for device type SW not available
D3D created ok
Error: 8876086C
Could not initialize Direct 3D Hardware VP Device
D3D created ok
Error: 8007000E
Could not initialize Direct 3D Software VP Device
D3D created ok
AdapterCount = 1




WHY ???

mY ADAPTER OF VIDEO IS BAD IS OLD OR WHAT PLEASE HELP ME I CAN PLAY TOO IN LAN . i HAVE TWO COMPUTERS AND i WILL LIKE PLAY IN MY COMPUTERS FOR LAN AND TOO FOR INTERNET WITH MY FRIENDS JEJEJE PLEASE HELPME
User avatar
Implode
Site Admin
Posts: 433
Joined: Fri Feb 24, 2006 3:35 am
Location: Newfoundland, Canada
Contact:

Re: HELP!!!!

Post by Implode »

comemostro wrote:Error: 8876086C
Could not initialize Direct 3D Hardware VP Device
D3D created ok

Error: 8007000E
Could not initialize Direct 3D Software VP Device
D3D created ok

WHY ???

mY ADAPTER OF VIDEO IS BAD IS OLD OR WHAT PLEASE HELP ME I CAN PLAY TOO IN LAN . i HAVE TWO COMPUTERS AND i WILL LIKE PLAY IN MY COMPUTERS FOR LAN AND TOO FOR INTERNET WITH MY FRIENDS JEJEJE PLEASE HELPME
First error simply indicates that you have an older video card that doesn't support hardware vertex processing. This doesn't matter - it will just default to software instead (although it will run pretty slow).

However you're also getting an error on software vertex processing. 8007000E is "out of memory"!!! I've never heard of anyone managing to get this error before - have you done anything weird with your configuration, like using EMM386 (which you don't need even in Win98)?
Post Reply